NateChrony v2.5!
The latest iteration of the most accurate Chronograph on the market, and replaces the v2 as our basic Chronograph. However it now has the same hardware as the SteadyShot, so can be upgraded via software to a SteadyShot.
The NateChrony is a barrel mounted ballistic chronograph for all Air Rifles. It is the most accurate available - calibrated from our certified master Chronographs to within 1fps @ 1,000fps. Its affordable, super easy to use, and best of all - no more missed readings! The NateChrony mounts onto your barrel with one of the adapters for perfect alignment every time.
Using your mobile phone as the screen and battery, means you get the best display on the market and never get surprised by a flat battery in your Chronograph.
Any device with Wi-Fi and a web browser - mobile phone, tablet, laptop, pc will work with the NateChrony. You connect to the NateChrony’s Wi-Fi hotspot and load a page directly from it, there’s no internet or apps to install, no permissions required or data shared.
The NateChrony is fully featured and will provide all the data even the most demanding tuner requires. It displays a current shot string, full statistics: min, max, average, spread, standard deviation, and has four additional save slots - all of which retain the data when power is lost. It also has advanced features such as live graphing output, and voice readout - all of wich are easily configured via a web interface.
Requirements
You’ll need this stuff to use the NateChrony - typically if you have a mobile phone you’re set!
- If using a mobile phone/tablet, it should be less than 5 years old & up to date
- Working knowledge of your device, including browser and internet technologies
- Working knowledge of any additional security software installed on your device
- A 5v standard USB power source
- A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
- A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
- You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu - Shoot, you hear the speed and power readout
NOTE: if you have software or settings on your device that does not permit this - you will need to change your settings.
Specifications
- Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps
- Resolution: <0.1fps shot to shot at 1,000fps
- Air powered guns only
- CO2 power can cause vapour, not recommended
- Maximum caliber: ~45-50 cal (depending on power)
- Maximum power: 150 fpe
Included with the NateChrony:
- The Chronograph: The thing you pop on the end & shoot through
- Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90degree connector
- The Software: Either the standard software, or the Airsoft version of software
- Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
- Safety Carabiner: Allows you to secure the chrony for added safety or convenience
- Soft Case: A carrying pouch to put it in
- Test Pellet: A plastic pellet for the drop test
- Phillips Driver: A phillips driver for the adapter grub screw
