NateChrony Steadyshot - Aluminium in Stone

Take your training to the next level - we've added motion sensors to the NateChrony!

We've taken the best Chronograph on the market to the next level - by adding a 6-axis inertial measurement unit to it. You can now see how your muzzle is moving when you shoot - is it steady? is the movement smooth? are you consistent?

The SteadyShot also has the advanced software with new features:

• Full automatic fire measurement, up to 1,250 shots per second
• Airsoft specific screens
  • fps & J, with a rate of fire for each shot
  • Pre-programmed & quick change bb weights
• Field mode - quickly check if you're above/below 3 programmed speeds/powers

You can see your movement on each axis via 3 separate graphs:

• Left/Right
• Up/Down
• Back/Forth

You can also view your movement in a 3 dimensional line graph - showing how you moved in space.

All NateChrony adapters are fully compatible with the SteadyShot.

Requirements:

You'll need this stuff to use the NateChrony - typically if you have a mobile phone you're set!

• If using a mobile phone/tablet, it should be less than 5 years old & up to date
• Working knowledge of your device, including browser and internet technologies
• Working knowledge of any additional security software installed on your device
• A 5v standard USB power source
• A device (phone/tablet) that can connect to a Wi-Fi hotspot, that does not have internet access
• A web browser that can connect to a HTTP (not HTTPS) web page and run JavaScript
• You can test your device here, ensure the page loads and displays a speed and power value, and when clicking on Menu - Shoot, you hear the speed and power readout

NOTE: if you have software or settings on your device that does not permit this - you  may have issues.

Specifications

• Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographs
• Resolution: <0.1fps shot to shot at 1,000fps
• Weight: 60g/72g (Polymer/Aluminium)
• Save >1,000 shots across 5 save slots
• Max speed: 2,500fps (software limit - can be increased)
• Full export of all raw data to CSV
• Max rate of fire: 1,250 shots per second
• SteadyShot capture time: 0.75-25sec (software config)
• Air powered guns only
• CO2 power can cause vapour, not recommended (long barrels on warm days may be ok, cold barrels on cold days will cause issues)
• Maximum caliber: ~45-50 cal (depending on power)
• Maximum power: 150-200 fpe

Included with the NateChrony SteadyShot:

• The Chronograph: The thing you pop on the end & shoot through
• Premium USB Cable: A quality braided USB-C to USB-A/C cable, with a 90degree connector
• The Software: Standard NateChrony software
• Barrel Adapters: Each NateChrony comes with two 1/2 UNF threaded barrel adapters, to attach it to your rifle
• Soft Case: A carrying pouch to put it in
• Test Pellet: A plastic pellet for the drop test (inside the soft case)
• Phillips Driver: A phillips driver for the adapter grub screw
• Sticker: for maximum accuracy performance