Walther Reign M2 Tuning Regulator by Huma-Air
This tuning regulator for your Walther Reign M2 build by Huma-Air is specially designed to convert your unregulated air rifle into a fully regualted air rifle with ultimate concistancy.
This tuning regulator is a one on one fit; it just screws between the action of the rifle and the pressure bottle. When fitted it is invisible inside the stock. No modifications need to be done to the stock of the rifle.
The Pressure can be set by turning the set-screw of the regulator what can be found inside the regulator. Half a turn counter clockwise equals to about 25-30 bar pressure increase. The regulator set pressure can be read off the packaging of the regulator.
The benefits of the Huma-Air, Walther Reign M2 tuning regulator are:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range
- It will give you a better shotcount and a full flat shotstring immediately.
- It uses a long stroke piston that gives great consistency
- The regulator body and the housing are screwed together as one piece.
- DIY fitting is a real option for the most people.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process
Pressure settings of the Huma-Air Regulator For The Walther Reign M2 Air Rifle
Your Walther Reign M2 regulator comes preset on the pressure we have tesed it and it is marked on the packing. You can set the regulator according to your wishes within the pressure range.
The Huma-Air Walther Reign M2 tuning regulator comes in a wide pressure range of 70-200 bar output covering sub 12 ft/lbs and FAC models.
The Pressure can be set by turning the set-screw of the regulator what can be found inside the regulator. Half a turn counter clockwise equals to about 25-30 bar pressure increase. The regulator set pressure can be read off the packaging of the regulator.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze and steel.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
