
High Flow Dual Hole Transfer Port For FX Panthera, Dynamic, King By Huma-Air
We have managed to optimize and even enlarge the air passage in this High Flow Dual Hole Transferport. The V-shaped transfer opening makes sure you will have the maximum and smoothest air passage area. The middle support bridge divides the transfer port into a dual hole port. This middle bridge makes sure the pellet or slug nose cannot fall into the enlarged transferport hole, but will be guided smoothly by the middle bridge into the barrel.
This dual hole transfer port has much larger air passage area compared to the oem port for maximum perfomance. The increasement in surface varies by caliber; specially for the smaller calibers like .177, .22 and .25 calibers the enlargement and flow optimalization is substantial.
For the .30 calibers there enlargement is negligible as there is not enough material to remove for enlargement. We have the .30 model as replacement or to be used in the caliber exchange kit
In combination with our High Flow Slug- and Pellet Probe you will be able to get even more power out of you Fx Panthera, FX Dynamic or FX King.
This part can replace the FX item numbers: 20928, 20929, 20930, 20931
IMPORTANT NOTES:
FX uses a medium strength treadlocker to fixate the transferport to the barrel to prevent the barrel coming loose. We strongly advice you to use a treadlocking adhesive like Loctite® 2400 also
Please check the FX Factory Exploded View before dismanteling the rifle
The barrel system runs thru a pressurized