Huma-Air Tuning Regulator For The Airgun Technology Uragan
For the Airgun Technology Uragan model we have a tuning pressure regulator available that replaces the original factory regulator. Due to our ultra compact build we reduced the size of the regulator compared to the factory reg with almost 70%. The extra space created we have used for extra regulated air. This extra volume can be used for extra power with the same reg pressure or you can reduce the regulator pressure and get the same pelletspeed as before. It is an one-on-one replacement, just remove the old regulator and replace it with the Huma-Air regulator and plenum. The regulator is placed with the pressure scale facing the high pressure input side of the action (hose side). This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
The benefits of the Huma-Air, Airgun Technology Uragan tuning regulator you are:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Due to our compact regulator build and different plenum size you will have more air available and you can use lower output pressure for the same power
When you order your Huma-Air, Airgun Technology Uragan tuning regulator you will receive:
- Your regulator preset to your own wishes
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Pressure settings of your Aigun Technology Uragan Regulator by Huma-Air
Your Airgun Technology Uragan Tuning Regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.
the output pressure range is stepless adjustable from 60-155 bar.
Huma-Air Quality Control
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.
